Descargar Imprimir esta página

Hansgrohe E 04353 0 Serie Instrucciones De Montaje / Manejo / Garantía página 2

Ocultar thumbs Ver también para E 04353 0 Serie:

Publicidad

⅝"
⅝"
Service Stops / Butées d'arrêt
d'isolation / Cierres de servicio

2⅝"-3¾"
2⅝"-3¾"
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate @ 44 PSI
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
This trim is for use with iBox Universal Plus
model 01850181 (not included).
To prevent scald injury, the maximum output
temperature of the shower valve must be
no higher than 10°F. In Massachusetts,
the maximum output temperature can be no
higher than 11° F.
Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
closed
ferme
cerrado
open
ouvert
abierto
15 - 75 PSI
145 PSI
10° - 140° F*
176°F*
8 GPM

Publicidad

loading

Este manual también es adecuado para:

Metris c 15753 1 serie