Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Problem
There is too much
noise and/or vibra-
tion during opera-
tion.
8
TECHNICAL DATA
Voltage
No load speed
Blade speed
Blade length
Cutting capacity
Weight (without battery pack)
Measuered sound pressure level
Guaranteed sound power level
Vibration
Uncertainty
Battery model
Charger model
9
WARRANTY
(The full warranty terms and conditions can be found on
Greenworks website)
The Greenworks warranty is 3 years on the product, and 2
years on batteries (consumer/private usage) from the date of
purchase. This warranty covers manufacturing faults. A faulty
product under warranty might be either repaired or replaced.
A unit that has been misused or used in other ways then
described in the owner's manual might be rejected for
warranty. Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not affected
by any additional warranty offered by a dealer or retailer.
Possible cause
Solution
1. Stop the ma-
chine.
2. Remove the
battery.
The parts are loos-
3. Inspect for
en.
damage.
4. Check and
tighten loose
parts.
Do not use the ma-
The parts have
chine and contact
damage.
the service center.
24V
3000 (±10%)
-1
min
3000 (±10%)
-1
min
560 mm
18 mm
2.1 kg
89 dB(A),
K
PA
98 dB(A)
≤2.5 m/s
1.5 m/s
G24B2,
G24B4 and
other BAG ser-
ies
G24C and oth-
er CAG series
English
A faulty product must be returned to the point of purchase in
order to claim for warranty, together with the proof of
purchase (receipt).
10
EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name:
Address:
Name and address of the person authorised to compile the
technical file:
Name:
Address:
Herewith we declare that the product
Category:
Model:
Serial number:
Year of Construction:
•
is in conformity with the relevant provisions of the
=3 dB(A)
Machinery Directive 2006/42/EC.
•
is in conformity with the provisions of the following
other EC-Directives:
2
•
2014/30/EU
2
•
2000/14/EC & 2005/88/EC
•
2011/65/EU & (EU)2015/863
Furthermore, we declare that the following parts, clauses of
European harmonised standards have been used:
•
EN 62841-1; EN 62841-2-11; EN 55014-1; EN 55014-2;
IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC
62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8
Measured sound pow-
er level:
Guaranteed sound
power level:
Conformity assessment method to Annex V / Directive
2000/14/EC.
Place, date: Malmö,
03.03.2020
6
GLOBGRO AB
Globe Group Europe
Riggaregatan 53, 211 13 Malmö Sweden
Peter Söderström
Riggaregatan 53, 211 13 Malmö Sweden
Hedge Trimmer
2205507(HTG330)
See product rating label
See product rating label
L
: 95 dB(A)
WA
L
: 98 dB(A)
WA.d
Signature: Ted Qu, Quality Director
Publicidad
