Jensen DMR2116i Manual Del Propietário página 36

TROUBLESHOOTING
Before going through the checklist, the check wiring connections. If any of the
problems persist after checking the list, contact your nearest service dealer.
Problem Cause
No power. • The car ignition switch is
not on.
• The fuse is blown.
No sound. • The volume is at minimum.
• The wiring is not properly
connected.
The • The built-in microcomputer
operation is not operating properly
keys do not due to noise.
work.
The radio • The antenna cable is not
does not connected.
work.
The radio • The signals are too weak.
station
automatic
selection
does not
work.
File You have files with Digital
information Rights Management( DRM).
shows in
display
panel but
will not play.
36
All manuals and user guides at all-guides.com
Solution
• If the power supply is
connected to the car
accessory circuits, but the
engine is not running, switch
the ignition key to "ACC".
• Replace the fuse. Make sure
the amperage matches the
specified value.
• Adjust the volume to a desired
level.
• Check the wiring connection.
• Press the RESET button.
• The faceplate is not properly
installed.
• Insert the antenna cable
firmly.
• Select a station manually.
Contact the vendor for proper
use.