Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
Noise/Vibration Information
The vibration emission level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly maintained, the vibration emission may differ.
This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is
switched off or when it is running but not actually doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organization of work patterns.
APPLICATION
The machine may only be used for dry sanding work and polishing. It is suitable for working on wood, metal,
plaster, plastic and filer surfaces, and also be used for removing rust, old paint and intermediate sanding.
are devoted to continuously improving and perfecting the existing products. Therefore, the technical
performance and design concept of products may vary without any prior notice; our apology for any possible
incurrence of inconvenience therefrom. Read and follow the operating instructions and safety information
before using for the first time. Save this manual.
Voltage
Rated power input
No-load speed
Sanding plate diameter
Cable
Cable length
Weight
LpA sound pressure level
LWA sound power level
Uncertainty
Vibration emission value
Uncertainty
110V 〜 60Hz
300W
12000/min
125mm
PVC
2m
1.2 Kg
81 dB(A)
92 dB(A)
3 dB(A)
4.89 m/s²
1.5 m/s²
www.ELITETOOLS.co
Keep Working
3
Publicidad
