Publicidad
Idiomas disponibles
Idiomas disponibles
AFTER USE
• When you put away the tool, switch off the motor and ensure that all moving parts have come to a complete
standstill WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
• Do not connect the blue (= neutral) or brown (= live) wire in the cord of this tool to the earth terminal of the plug
• If for any reason the old plug is cut off the cord of this tool, it must be disposed of safely and not left unattended
SYMBOLS
Read the manual
Warning
Double insulation
Wear eye protection
OPERATING INSTRUCTION
Speed Controller (Fig.3)
With the speed controller (3) you can adjust the speed according to application. Select the appropriate speed
setting and make sure the sander does not become overloaded and stops running.
Turn the speed controller (3) steplessly to the desired setting to increase or decrease the speed. The
controller can be adjusted from 1-6. The speed rate can be changed during operation as well.
Hint: The required speed rate for cutting resp,sanding a workpiece depends on the material that you are going
to process. For best performance, make some practical tests.
Selecting the Sanding paper
Always use abrasive papers suited to the material you want to sand. Then papers must have correct grain size.
Depending on grain size there are degrees of coarseness. The coarseness It is important to use the right
paper for each job. For rough sanding use grain sizes up to 80, for soft wood as larch, pine or spruce use
papers from 60grit to 150grit.For dense hardwood as beech or maple, the grain sizes with up to 220 can
be used.
Inserting sand paper (Fig.4)
Switch off the machine, disconnect the power.
The sanding plate is fitted with a hook and eye system for sanding sheets. This enables rapid application of
new sheets without the need for a tensioning system. Before applying a new sheet, tap the dust from the hook
and eye fastening of the sanding plate. Stretch the sanding paper over the sanding plate (5) and ensure that
the holes (4) of the plate and the disc match up.
Wear ear protection
Wear dust mask
Do not dispose of old appliances in the household garbage
Keep your hands and feet away from all opening
www.ELITETOOLS.co
7
Keep Working
Publicidad
