Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Fault
No projected image
Android system crashes
Screen display error
Remote control is missing or not paired and
the projector cannot be turned on remotely.
If the projector overheats, it will
automatically turn off.
Other internal system errors
10
Turn off the projector and disconnect from the power, then plug in the power cord and turn on the projector.
Turn off the projector and disconnect from the power, then plug in the power cord and turn on the projector.
Turn off the projector and disconnect from the power, then plug in the power cord and turn on the projector.
Turn off the projector and disconnect from the power. Wait for five minutes, then plug in the power cord and
turn on the projector. After the projector has been restarted, pair the remote control again.
Please remove any obstacles from the air inlets and outlets so as to ensure a smooth airflow through the
projector. Follow the instructions above to restart the projector.
Please contact a qualified technician to service the device, or return the projector to the after-sales department.
Solution
Publicidad
