Publicidad
Idiomas disponibles
Idiomas disponibles
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
NAME
Recycle
Symbol
V
Volts
min
Minutes
Direct Current
No Load
n o
Speed
.../min
Per Minute
FEATURES
PRODUCT SPECIFICATIONS
Revolutions per minute (RPM) ................0-375/0-1,600/min
Clutch.................................................................24 position
ASSEMBLY
UNPACKING
This product requires assembly.
Carefully remove the tool and any accessories from the
box. All items listed in the Includes section must be
included at the time of purchase.
WARNING:
Items in this Assembly section are not assembled to
the product by the manufacturer and require customer
installation. Use of a product that may have been
improperly assembled could result in serious personal
injury.
If any parts are damaged or missing, please call
1-800-776-5191 for assistance.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
DESIGNATION/EXPLANATION
This product uses lithium-ion (Li-ion) batteries. Local, state or federal laws may prohibit
disposal of batteries in ordinary trash. Consult your local waste authority for information
r egarding available recycling and/or disposal options.
Voltage
Time
Type or a characteristic of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
5 - English
Blows per minute (BPM) .......................... 0-5,600/0-24,000
WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended for use
with this product. Any such alteration or modification is
misuse and could result in a hazardous condition leading
to possible serious personal injury.
INSTALLING/ADJUSTING THE AUXILIARY
HANDLE ASSEMBLY
See Figure 1, page 11.
An auxiliary handle is packed with the drill for ease of oper-
ation and to help prevent loss of control. The handle can be
mounted for left or right hand use.
Insert the handle screw into the hole located above the
switch trigger and seat the hex head into the hole.
Slide the handle collar onto the screw. Seat the hex end
of the collar into the hex hole.
Thread the auxiliary handle onto the screw and tighten
securely.
Publicidad
