Descargar Imprimir esta página

Metabo HWA 3500 Inox Manual Original página 11

Ocultar thumbs Ver también para HWA 3500 Inox:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24
2002/96/EC on waste electrical and electronic
equipment and its implementation in national legal
systems.
13. Technical Specifications
Explanatory notes on the specifications on page 3.
Subject to change in accordance with technical
progress.
The pump characteristic curve (diagram on page
3) shows the conveying capacity that can be
reached depending on the conveying height
(suction height 0.5 m and 1" suction hose).
E
= Electronics / dry run protection
V
= Check valve (20) integrated on the
suction connection (12) of the pump
K
= Mains cable
U
= Mains voltage
f
= Frequency
P
= Rated input power
1
I
= Rated power
C
= Operating condenser
n
= Rated speed
F
= Max. conveying capacity
V,max
F
= Max. conveying height
h,max
F
= Max. conveying pressure
p,max
p
= Pressure switch switch-on pressure
1
p
= Pressure switch switch-off pressure
2
S
= Max. suction height
h,max
S
= Max. supply temperature
temp
T
= Ambient temperature
temp
S
= Splash protection class
1
S
= Protection class
2
S
= Insulation class
3
M
= Pump housing material
P
M
= Pump shaft material
R
M
= Pump impeller material
W
D
= Suction connection female thread
s
D
= Pressure connection female thread
p
T
= Vessel volume
V
T
= Max. vessel pressure
p,max
T
= Vessel pilot pressure
p,1
A
= Dimensions:
length x width x height
m
= Weight (with mains cable)
~
AC power
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be
higher or lower depending on the operating
conditions, the condition of the power tool or the
accessories. Please allow for breaks and periods
for assessment purposes when the load is lower.
Arrange protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Typical A-effective perceived sound levels:
L
= Sound-pressure level
pA
L
= Acoustic power level
WA
K
, K
=Uncertainty
pA
WA
L
= Guaranteed acoustic power level as per
WA(G)
2000/14/EC
Wear ear protectors!
ENGLISH en
11

Publicidad

loading