Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
BASE INSTALLATION
CAUTION:
Do not place side load onto feet when righting
the cabinet .
A thorough inspection must be made before installation and any
damages or missing parts must be promptly reported . Do not
proceed with the installation . Do not dispose of packaging before
you are satisfied with your new utility sink.
1 . Unpack the unit and place the sink (B) on a blanket or
cardboard to protect the surface .
2 . Turn the cabinet (A) upside down onto the protective surface .
3 . Gently attach the cabinet base (G) onto its proper location .
Using the supplied base screws (J), attach the base to the
cabinet .
4 . Attach cabinet feet (K) to the base .
5 . Gently place the cabinet upright .
DOOR HANDLE INSTALLATION
1 . Insert the door hand screws (H) into the pre-drilled holes on each
door .
2 . Attach the door handles (F) and hand tighten the door handle
screws (H) .
3 . Repeat on other door .
HOW TO CHANGE THE DOOR PANEL
NOTE: The door panel is reversible showing either white or black,
follow the instructions below to change it.
1 . Loosen the screws in the tabs . Turn the tabs so they are no
longer covering the panel . Remove the panel .
2 . Place the new panel in place . Turn the tabs so they hold the
panel in place . Tighten the screws . Do not over tighten .
G
J
K
A
1
2
8
F
H
3
4
Publicidad
