Coccolle Elona Manual Del Usuario página 6

EN
installed properly, so that the pelvis is firmly engaged, shall be stressed; The
device should be replaced when it has been subject to violent stresses in an
accident;
It is a danger of making any alterations or additions to the device without the
approval of the Type Approval Authority, and a danger of not following closely
the installation instructions provided by the child restraint manufacturer;
When the chair is not provided with a textile cover, it shall be recommended that
the chair should be kept away from sunlight, otherwise it may be too hot for the
child's skin; Children should not be left in their Enhanced Child Restraint System
unattended; Any luggage or other objects liable to cause injuries in the event of
a collision shall be properly secured;
The Enhanced Child Restraint System shall not be used without the cover;
The Enhanced Child Restraint System cover should not be replaced with any
other than the one recommended by the manufacturer, because the cover
constitutes an integral part of the restraint
performance.
When used for stature heights between 135 to 150cm this seat might not fit in all
vehicles;
The instructions should be retained for future use;
Components (fig.1)
a. Adjustable headrest
b. Headrest adjuster
c. Shoulder belt guide
d. Lap belt guide
e. Base
f. Reclining handle
g. ISOFIX Attachments
h. ISOFIX release buttons
i. ISOFIX indicators
j. ISOFIX vehicle anchorage
Installation
When installing the seat in the front vehicle seat make sure the backrest of the
vehicle seat is in an upright position.
Use ISOFIX +Belt
1. Position the seat inside the vehicle. Squeeze and pull the ISOFIX release
buttons to release the ISOFIX attachments. (fig.2) The ISOFIX attachments lock
only in the position where it is totally extended.
2. Click the ISOFIX attachments to the ISOFIX anchorage points in the vehicle
seat (fig.3). Make sure that all ISOFIX indicators are GREEN. (fig.4) Push the
seat as far as possible towards the backrest of the vehicle seat.
3. Slide the shoulder belt in the shoulder belt guide. (fig.5) Make sure the belt is
not twisted.