Publicidad
Idiomas disponibles
Idiomas disponibles
4.- OPERATION
IFF unit can be turned on without the remote control using the push button, located on the right end of the
heater.
REMOTE CONTROLLER OPERATION
Infrared IFF-2600 is operated using the remote control supplied with the heater. Insert 2 x AAA Alkaline
batteries into the remote control.
1
3
5
Note: All IFF2600 units and their remote controls have the same frequency, so it is possible to control several
IFF2600 units with just one remote control.
Timer Setting
Press Timer button (5) and use the Up and Down buttons (2) and (3) to select the number of hours the heater
will be working. The heater will be working providing the selected heat level during these hours. When the time
has finished, the heater will automatically disconnect the heating elements.
Inserting Batteries
Insert 2 AAA/ Alkaline type batteries into your remote control
1. Flip the backside of your remote control and pull out battery cover. Insert the batteries in accordance with
the instructions and polarity of the batteries.
2. Change the batteries in the same way described above.
Warning:
1. Replace the old batteries with the same type batteries. Otherwise, your heater may not function well.
2. Pull out the batteries in case of long terms of disuse to prevent leakage which may impair your remote
control.
3. Do not allow water or liquid to get into the remote control.
Key
1
2
2
4
3
4
Heating level setting. Press the button and use Up and Down
5
Function
Turn On / Off the heater
Increase heating level or timer hours
Decrease heating level or timer hours
buttons to set the heating power level. (L1 to L2)
Timer Setting
13
Publicidad
