SK TKRT 21 Instrucciones De Uso página 18

4.3 Distance
• Fit contact wheel as chosen for user's application.
• Press "measure" or keep the "measure" button pressed, now place the
contact wheel on the moving surface and read the linear rate, ensure
wheel is vertical to the moving surface.
• Press "stop" or release the "stop" button to stop the measurement, the
tachometer will then hold the last reading on the display.
• The instrument retains selected measurement mode for further distance
measurements after switching off the tachometer, until used to a
different mode.
The workflow of the Distance mode is the same as the Linear Speed mode
but with different units.
During the distance measurement, the tachometer records the total
measured distance value. After the measurement, the final distance is
displayed.
16 EN