Installing and Removing the Card
The camera can use an SD, SDHC, or SDXC memory card. UHS-I
Speed Class SDHC and SDXC memory cards can also be used. The
captured images are recorded onto the card.
Make sure the card's write-protect switch is set upward to
enable writing/erasing.
Installing the Card
Write-protect switch
Possible shots
Open the cover.
1
Slide the cover as shown by the
arrows to open it.
Insert the card.
2
As shown by the illustration, face
the card's label side toward you
and insert it until it clicks in place.
Close the cover.
3
Close the cover and slide it in the
direction shown by the arrows until it
snaps shut.
When you set the power switch to
<1>, the number of possible shots
(p.31) will be displayed on the LCD
monitor.
27