Publicidad
Idiomas disponibles
Idiomas disponibles
EN
EN
OPERATING MODE
DISPENSED
To dispense fluid, proceed as follows:
1. Adjust line pressure until reach desired value.
WARNING: Do not exceed the maximum
!
equipment working pressure. See page of
technical specifications.
2. The gun has a safety lock system that prevents
accidental opening. If the cam located in the middle of
the trigger is in the anti-open position, place it in the
open position to begin dispensing.
OPEN VALVE LOCK POSITION
• To lock the valve in fully open position, first you must
pull the trigger to its maximum opening.
• Then, move the cam to the lock position. Then, the
trigger can be released and the valve will remain open.
4
896 854 R. 07/23
Samson Corporation • One Samson Way • N.C. 28778 Swannanoa USA • Phone (828) 686-8511 • Fax (828) 686-8533
• To unlock the open valve position, pull the trigger again
to its maximum opening and then return the cam to the
rest position. After that, trigger can be released to rest
position with the valve closed.
Publicidad
