7
8
9
1
3
1
4
English
Remove the disk.
Place the handle over the stem (1).
Turn the handle counter-clockwise as far as it
will go ().
Measure the temperature of the output water
(3).
If the valve opens through hot,
reverse the cartridge. See page
14.
If the maximum high temperature
is greater than 120°F or that
permitted by local plumbing
code, adjust the rotational limit
stop. See page 16.
Turn the water off.
Remove the handle (4).
Lubricate the cartridge o-ring using a small
amount of white plumber's grease.
Install the sleeve.
Install the escutcheon.