Aon PR-200 Manual Del Usuario página 23

position. If paper jam, open the paper strage cover, and take out the paper. If the
cutter can not be back to the original position, open the cover of it, and turn the white
plastic gear by the direction suggestive on the cutter by hand to make the cutter be
back to the original position.
If cutter jam, but hope no loss of data in printer, don't turn off the power. Get the
cutter back to the original position by the above mentioned method by hand. Then
open the paper cover and take out the paper, close the paper cover. The printer will
recover automatically from Cutting Error.
2.3 Interface
2.3.1 USB Interface
The standard accessories of PR-200 printer includes a Mini USB cable with D Type
connector which connects printer and main device. The USB type belongs to the
slave device type(DEVICE). Pins description of Mini-USB as Fig.2-2 below:
Fig.2-2 USB interface
2.3.2 Cash Drawer Interface
The cash drawer interface of PR-200 adopts RJ-11 6-pin socket, as Fig.2-3 shows:
Pin Function
1 V Bus
2 Data-
3 Data+
4 GND
5
Notes
Power +5V
Data-
Data+
Ground