Publicidad
18
18
5L
To insert the drawer into your unit, tip the front of the drawers down and drop the rollers on the drawers behind the rollers on the unit.
Lift the front of the drawers up and slide them into the unit.
Apply the WARNING LABEL (5L) to the DRAWER BOTTOM (D989). You should be able to read the label when the drawer is
open. When the drawer is closed, it will hide the label. Peel off the backing and apply the label as shown in the diagram.
NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it.
We recommend using the SAFETY BRACKET (1G) for added stability. Use a BLACK 9/16" LARGE HEAD SCREW (1S) into the
top of the unit and a BLACK 1-7/8" PAN HEAD SCREW (16S) into a stud in your wall.
415107
No load
40 lbs.
30 lbs.
D989
www.sauder.com/services
BLACK 1-7/8" PAN HEAD SCREW
1G
(1 used into a stud in your wall)
BLACK 9/16" LARGE HEAD SCREW
(1 used into the top of your unit)
Serious or fatal crushing injuries can
occur from furniture tip-over. To help
prevent tip-over:
-Place heaviest items in the lowest drawers.
-Unless specifi cally designed to
accommodate, do not set TVs or other heavy
objects on top of this product.
-Never allow children to climb or hang on
drawers, doors, or shelves.
-Never open more than one drawer at a time.
-If equipped with a drawer interlock system,
do not defeat or remove it.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
16S
1S
WARNING
Page 23
Publicidad
