Bosch 060160A101 Manual Original página 15

21 Wing bolt for parallel guide
22 Roller guide
23 Wing bolt for horizontal alignment of the
roller guide
24 Wing bolt for locking of the horizontal
alignment
25 Base cover sleeve*
26 Tilt base*
27 Wing bolt for angle adjustment
28 Scale for routing angle adjustment
29 Handle*
30 Extraction hood*
31 Extraction adapter*
32 Side-handle subbase*
* Illustrated or described accessories are not included
as standard delivery.
For Your Safety
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Save all warnings and instructions for future
reference.
Additionally, the general safety instructions ei-
ther in the enclosed booklet or those added in
the centre of these operating instructions must
be observed.
■ The allowable speed of the tool insert
must be at least as high as the maximum
speed stated on the machine. Accessories
driven in excess of their allowable speed can
be destroyed.
■ Routing tools or other tool inserts must fit
exactly in the tool holder (collet) of your
machine. Tool inserts that do not fit precisely
in the tool holder of the machine rotate irreg-
ularly, vibrate heavily and can lead to loss of
control.
■ Guide the machine against the workpiece
only when it is switched on. Otherwise
there may be danger of kickback when the
tool insert jams in the workpiece.
2 609 140 541 • 22.1.08
■ Keep your hands away from the routing
area and the routing tool. Hold the auxil-
iary handle or the motor housing with
your second hand. When both hands hold
the machine, they cannot be injured by the
routing tool.
■ Never cut over metal objects, nails or
screws. The routing tool can become dam-
aged and lead to increased vibrations.
■ Hold the power tool only by the insulated
gripping surfaces when performing an op-
eration where the cutting tool may contact
hidden wiring or its own power cord. Con-
tact with a "live" wire will also make exposed
metal parts of the power tool "live" and shock
the operator.
■ Use suitable detectors to determine if util-
ity lines are hidden in the work area or call
the local utility company for assistance.
Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead
to explosion. Penetrating a water line causes
property damage or may cause an electric
shock.
■ Do not use dull or damaged router bits.
Dull or damaged router bits cause increased
friction, can become jammed and lead to im-
balance.
■ Secure the workpiece.
clamped with clamping devices or in a vice is
held more securely than by hand.
■ Do not work materials containing asbes-
tos. Asbestos is considered carcinogenic.
■ Take protective measures when dust can
develop during working that is harmful to
one's health, combustible or explosive.
Example: Some dusts are regarded as carci-
nogenic. Wear a dust mask and work with
dust/chip extraction when connectable.
■ Always wait until the machine has come to
a complete stop before placing it down.
The tool insert can jam and lead to loss of
control over the power tool.
■ Do not use a machine with a damaged
mains cable. Do not touch the damaged
cable and pull the mains plug when the ca-
ble is damaged while working. Damaged
cables increase the risk of an electric shock.
A workpiece
English | 15