Publicidad
Serial ATAII Connectors
(SATA2_2: see p.2, No. 14)
(SATA2_3: see p.2, No. 13)
(SATA2_4: see p.2, No. 12)
(SATA2_5: see p.2, No. 11)
Serial ATA3 Connectors
(SATA3_0: see p.2, No. 16)
(SATA3_1: see p.2, No. 15)
(SATA3_M1: see p.2, No. 18)
(SATA3_M2: see p.2, No. 17)
(SATA3_M3: see p.2, No. 20)
(SATA3_M4: see p.2, No. 19)
We recommend to use Intel
SATA2_2, SATA2_3, SATA2_4 and SATA2_5) for your bootable
devices. This will minimum your boot time and get the best
performance. But if you still want to boot from Marvell SATA3
controller, you can still enable
you want to install USB 3.0 device on Marvell SATA3 port, please use
SATA3_M1 and SATA3_M2 as the fi rst priority for better performance.
Serial ATA (SATA)
Data Cable
(Optional)
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA
HDD power connector
ASRock P67 Extreme6 Motherboard
These four Serial ATAII (SATAII)
connectors support SATA data
cables for internal storage
devices. The current SATAII
interface allows up to 3.0 Gb/s
data transfer rate.
These six Serial ATA3 (SATA3)
connectors support SATA data
cables for internal storage
devices. The current SATA3
interface allows up to 6.0 Gb/s
data transfer rate. If you install
the HDD on the eSATA port on
the rear I/O, the internal
SATA3_M4 will not function.
®
P67 SATA ports (SATA3_0, SATA3_1,
Marvell SATA3 Bootable
Either end of the SATA data
cable can be connected to the
SATA / SATAII / SATA3 hard
disk or the SATAII / SATA3
connector on this motherboard.
Please connect the black end
of SATA power cable to the
power connector on each drive.
Then connect the white end of
SATA power cable to the power
connect to the
power supply
connector of the power supply.
in UEFI. If
31
Publicidad
