Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
22
WARNING! Electric shock! There is a risk of
an injury caused by electric shock!
Never operate the apparatus if a cable, the mains
cord or plug are damaged. Damaged mains cords
pose a hazard of electrocution.
Risk of fire! Risk of explosion!
A highly-explosive oxyhydrogen mixture
occurs when batteries are charged.
• Fire, sparks, naked flames and smoking are
forbidden.
• Provide adequate ventilation.
• Do not use the device in rooms in which easily
flammable material or gases may be present.
Never use the charger in moist or wet conditions.
Make sure the cooling function is not limited by cove-
ring the cooling slots. Do not operate the appliance
near heat sources or on a flammable surface.
Only connect or disconnect the battery connection
cable if the charger is not connected to the mains.
Also pay attention to the instructions and informati-
on provided by the battery and vehicle manufacturer.
Ensure that the vehicle is switched off if the battery is
mounted fixed in the vehicle! Switch off the ignition.
Park the vehicle and secure it.
1.Plug the charger into a mains socket.
2.Select the mode you need.
3.Connect the red battery clamp to the positive termi-
nal of the battery first.
4. connect the black battery clamp to the negative
terminal of the battery (when installed, to the body,
away from the battery and fuel line).
5. after charging: Unplug the charger from the socket.
6. first remove the black clamp from the body and
then the red clamp from the battery.
Translated with www.DeepL.com/Translator (free
version)
This sequence must be followed!
Danger of short circuit! Make sure that the two clips
of the pole connecting cables do not touch or are
connected by a conductive object, such as a tool.
Handle the terminal connecting cable ("–" and "+")
only by the insulated sections!
Never hold both clips at the same time when the
device is running.
Specified Conditions Of Use
The battery charger is only to be used for charging of
vehicles taking all technical data into consideration.
Types of batteries:
- Lead acid batteries (liquid electrolyte) (PB)
- Gel battery (GEL)
- Absorbent glass mat battery (AGM))
- Wet-cell batteries (WET)
- Maintenance-free lead acid batteries (MF)
- LiFePO4 batteries (85145 - GAB 12V-4A)
WARNING
It is not suitable for charging NiCad or NiMH
batteries and other non-rechargeable batteries, for
example.
Please note that our equipment has not been
designed for commercial, craft or industrial use. If the
equipment is used in commercial, craft or industrial
operation or for similar activities, we cannot assume
any liability.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
Publicidad
