Carat DPSK020000 Manual De Instrucciones página 25

If [F] Flange is off center, loosen M4 Bolt x 3pcs. at back side and adjust
the position of [A] Main Unit.
* Re-tighten 3 screws securely aft er adjustment.
F
8. Hold [A] Main Unit and connect the Vacuum Hose into the Duct with [K] Joint.
Do NOT hold the Grinder when connecting the Vacuum Hose.
K
Duct
A
9. Attach the Handle to the Grinder.
Handle
#10
(3pcs.)
A
M4 Bolt
Vacuum Hose
x 2
Side Cover
* If the Handle comes in contact,
detach the Side Cover.
25