Ryobi RY18SPA Traducción De Las Instrucciones Originales página 7

TROUBLESHOOTING
Problem Possible cause
The submersible The air lock valve is blocked.
pump is not
pumping water
while it is on.
The submersible The air lock valve is blocked.
pump is leaking
water from the air
lock valve while it
is on.
The submersible pump does not
detect water.
The red LED of the The motor is idling, or the impeller is
water sensor is on, blocked during operation.
and the product is
beeping.
There is an issue with the battery
pack.
Solution
Check the fi lter and air lock valve and remove debris or
any blockage.
Remove debris or any blockage in the air lock valve.
Immerse the submersible pump in water. If this does not
solve the issue, proceed to the next solution.
Check the fi lter and impeller and remove debris or any
blockage. Follow the cleaning instructions in the manual.
If this does not solve the issue, proceed to the next
solution.
Replace the battery pack.
7
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR