Connection N&C WNU150 Manual De Usuario página 25

c. Once connected, your WPS profile appears in the Profile List screen.
The PIN Method
a.
To use the PIN method, select 'PIN / numeric code' and, in the 'WPS AP List' field,
select the name of the network to which you connecting. Click the right arrow to
save your settings.
b. You can use either the PIN provided by the Ralink Utility or the PIN provided by
the device to which you are connecting.
PIN provided by the Ralink Utility.

If the device to which you are connecting requires a PIN, in the 'Config Mode' field, from
the drop-down list, select 'Enrollee'. Your PIN is displayed in the 'Pin Code' field on your
Utility. Then in the corresponding WPS interface on the device to which you are connect-
ing, enter your PIN in its PIN entry field.
25