Descargar Imprimir esta página

Steren CCTV-196 Manual De Instrucciones página 2

Cámara cctv digital de alta definición tipo minibala

Publicidad

Idiomas disponibles

Idiomas disponibles

CCTV-196-V1.0-instr.pdf
SEGURIDAD
V1.0
• Do not use or store the equipment near wet places. May
cause malfunction or shock hazard
• Don't install close to heat sources or electromagnetic
noise (electric engines, electric fence, power switches)
• Don't install the wires into the pipes where are electric
wires, could distort the image
• To capture videos and images in high definition, be sure to make the
connections correctly.
• For distances under 100 m use cat5e UTP cable.
• If you use a coaxial cable, the distance must not exceed 50 m.
• The camera should be connected into a no break, to protect it from the
hazard and can it continue working.
C
M
Y
CM
MY
Power
connector
CY
Video
CMY
connector
K
Installation Kit
Select the place to install the camera. (It is recommended that be
1
on a wall or a solid surface and fixed).
2
Make brands with the help of the included template, paste it in
desired location to place the camera and then drilling.
3
Insert the anchors
and screew.
2
06/10/16
8:43 a.m.
HD CCTV digital mini
bullet camera
Instruction manual
IMPORTANT
PARTS
IR LED
Adjustment secures
Lens
Sensor
Switch analog / digital
Allen key
Screws
INSTRUCTIONS
CCTV-196
4 4
ANALOG / DIGITAL
CONFIGURATION
If you are using a CCTV DVR-948 use
1016A
HD TVI mode
5
Make the connections according with the diagram.
TROUBLE
Cannot see images
Base
Image with interference
Image with color changes
Dowels
Input: 12 V - - - 1 A
Minimum light: 0.01 lux/F1.2
Format: AHD 1280 x 720
Image sensor: color CMOS
Video output: BNC
Resolution: 1.0 MP
Operational temperature: -10°C to 50°C
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from the
date of purchase.
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
Unscrew
Name of the retailer ____________________________________
the base
Address _____________________________________________
camera for
Date of delivery _______________________________________
easy installation
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please call to our Call Center.
INSTRUCTIONS
Adjust the angle of vision with a 2.5 mm wrench.
ON
ON
1
2
1
2
HD TVI
AHD
Turn on the DVR or the monitor to
6
verify that the camera sends
image.
TROUBLESHOOTING
SOLUTIONS
• Turn on the DVR or monitor
• Be sure that the connections in the
camera and the DVR are correct
• Verify that the power supply is not
damaged
• Check the cable selector is in the correct
mode digital or analog.
• Use another power suplly; could be
damaged
• Verify that the wires are in a good
conditions
• Verify that there is not unstable
connections
• Be sure that the camera is not placed
close from any fluorescent lamp
SPECIFICATIONS
Product: HD CCTV digital bullet camera
Part number: CCTV-196
Brand: Steren
WARRANTY
CONDITIONS
THIS WARRANTY IS VOID IN THE NEXT CASES:
RETAILER INFORMATION
01 800 500 9000
ON
ON
1
2
1
2
Analog
HD CVI

Publicidad

loading