Publicidad
STEP 15
E
J
L
Wall to be mounted to.
With the assistance of another person, locate and mark the studs in the wall that the cabinet will be
mounted to. Mark the location of the studs with a pencil.
Position the wall hanger (L) on the wall and mark the locations of the studs on the back rail. Drill two
3/16" diameter holes in the wall hanger (L) at the stud locations. Using a level, attach the wall hanger (L)
to the wall with four screws (10) as shown. It is important that the wall hanger is mounted to a minimum
of as least two studs. With the help of another person, place the assembled component onto the wall
hanger (L) so the two beveled edges on the back rail (J) and wall hanger (L) mate together.
systembuild.com
10
(x4)
10
L
10
8
22
10
You
Tube
Publicidad
