Sharp SJ-BA10IMXI1-EU Manual De Uso página 7

CHAPTER -3: USING YOUR FRIDGE FREEZER
Display and control panel
Operating your fridge
Cooler temperature settings
• Initial temperature value for Cooler Setting Indicator is 6
• Press set button once, the set value will start to blink.
• If you keep pressing set button, lower temperatures will be selected. (8, 6, 5, 4, 2, super and eco)
• If no button is pressed for 1 second, your choice will be set, it will blink 3 times. Buzzer will sound beep beep.
• The temperature value selected before Super Cool Mode or Economy Mode is activated will remain the same
when the mode is over or cancelled. The appliance continues to operate with this temperature value.
Super cool mode
How would it be used?
Press set button until super cool symbol will be seen on the screen. Buzzer will sound beep beep. Mode will be set.
During this mode:
• Economy mode can not be selected.
• Super cool mode can be cancelled by the same operation of selecting.
Economy mode
How would it be used?
Press set button until eco symbol will be seen on the screen. Buzzer will sound beep beep. Mode will be set.
During this mode:
• Super cool can be selected. Economy mode is automatically cancelled and the selected mode is activated.
• Eco mode can be cancelled by the same operation of selecting.
Door open alarm function
If cooler or freezer door is opened more than 2 minutes , appliance sounds 'beep beep'.
Warnings About Temperature Adjustments
• It is not recommended that you operate your fridge in environments colder than 10°C.
• Temperature adjustments should be made according to the frequency of door openings, the quantity of food
kept inside the fridge and ambient temperature of the placement of your fridge.
• Your fridge should be operated up to 24 hours according to the ambient temperature without interruption after
being plugged in, this is so it is completely cooled. Do not open the doors of your fridge and do not place food
inside it during this period.
• A 5 minute delay function is applied to prevent damage to the compressor of your fridge, when you take the
plug out and then plug it back in again after an energy breakdown has occurred. Your fridge will start to operate
normally after 5 minutes.
• Your fridge is designed to operate in the ambient temperature intervals stated in the standards, according to
the climate class stated in the information label. We do not recommend operating your fridge out of the stated
temperatures value limits in terms of cooling effectiveness.
Thermostat set level indicator
8 6 5 4 2
It is Economy mode
indicator.
button
C
o
It is Super cool
mode indicator.
Set
Button
LED
C.
o
EN -6-