4.4 selecting the temperature setting
To increase the temperature, press the
After switching on the temperature setting is illuminated.
Setting 0:
OFF
Setting 1:
minimum heat
Setting 2-3: Individual heat
Setting 4:
maximum heat
WARNING
If the heated underblanket is used continuously (for several hours) it is
recommended to use the lowest setting of the control to avoid overheat-
ing of the user.
NOte:
• The quickest way to heat up the heated underblanket is to select the highest temperature setting
of the controller, first.
• We strongly recommend switching on the heated underblanket approx. 30 minutes before going to
bed and covering it with the quilt to prevent the warmth from escaping.
• The foot section of this underblanket is additionally heated.
4.5 Automatic switch-back
NOte:
This electric underblanket features an automatic switch-back for safety purposes. Temperature settings
4 and 3 are automatically switched to temperature setting 2 after 3 hours.
4.6 Automatic switch-off
This electric underblanket is equipped with an automatic switch-off. This turns off the heat supply 12 hours
after the electric underblanket is first switched on. This is indicated by a flashing temperature setting. In order
to reactivate the electric underblanket, the sliding switch (4) must initially be set to off ("0" position). After about
5 seconds it is possible to switch it on again. If the electric underblanket will not be used after timed switch-off,
it should be switched off (sliding switch to position "0") and the mains plug removed from the mains socket.
4.7 switching off
Set the ON/OFF slider (4) to the OFF (0) position to switch off the electric underblanket. After switching off
the temperature setting is not illuminated any more.
NOte:
If the heated underblanket won't be used for several days, switch it off (Slider to setting "0"/OFF) and
remove the supply plug from the mains outlet.
5. cleaning and care
WARNING
Always remove the supply plug from the mains outlet and remove the con-
troller from the heated underblanket by disconnecting it at the connector.
Otherwise there is a risk of an electric shock.
button (6). To decrease the temperature, press the
13
button (7).