THERMEx SWINDON Instrucciones De Uso página 48

48 THERMEX SWINDON
LIGHT
RECIRcULATION
The hood can be used for recirculation. This is used in kitchens and in locations where there is
no possibility for vent to the outside. The air is first drawn through the grease filter and then
through a filter with active carbon to remove odours.
NOTE: Two recirculation filters must be used; these are not included in the purchase of the
hood, but can be bought as accessories. The product number on a set of recirculation filters is
535.21.8300.9.
The recirculation filters are installed as follows:
• Remove the steel filter.
• Install the two recirculation filters by turning them onto the flanges on the sides of the
motor.
• Replace the steel filter in the hood.
The light is turned on and off by pressing the dial.
When the light is activated, the blue LEDs will be
switched on along the left edge of the dial.
B 545217062209112016