Bulb replacement:
• The light is an energy efficient, long life LED. Therefore, it should not
need replacing throughout the life of the product. However, if it has to
be done, it has to be replaced by a qualified engineer. The following
symbol indicates that the light source in this appliance should only be
replaced by a qualified engineer.
PROBLEM
The wine cooler does not work.
Temperature inside the wine
cooler is too warm.
Temperature inside the wine
cooler is too cold.
Vibrations.
Moisture forms on inside wine
cooler walls.
Moisture forms on outside of
appliance.
The door does not close properly.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in elec-
tric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package
indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that
have reached the end of their useful life must be given to waste disposal centres specialising in separate collection of
waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment,
on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the
environment and health and optimises the recycling and reuse of components making up the apparatus. Abusive disposal
of the product by the user involves application of the administrative sanctions according to the laws.
E NGL I SH
12
TROUBLESHOOTING
POSSIBLE CAUSE AND SOLUTIONS
Not connected.
The circuit-breaker is tripped or the fuse is damaged.
Temperature control is set too warm. Turn the control to a cooler
setting and allow several hours for the temperature to stabilize.
Door is kept open too long or is opened too frequently. Warm air
enters the wine cooler every time the door is opened. Open the door
less often.
The door is not closed completely.
The door gasket does not seal properly.
The wine cooler has recently been disconnected for a period of time.
4 hours are required for the wine cooler to cool down completely.
Temperature control is set too cold. Turn the control to a warmer
setting and allow several hours for the temperature to stabilize.
Check to assure that the wine cooler is on a level surface.
The wine cooler is touching the wall. Re-level the wine cooler
and move it from the wall.
If continued vibration occurs, turn off the wine cooler and unplug
the power plug.
Contact Customer Service Dept. for further assistance.
Door is slightly open.
Door is kept open too long, or is opened too frequently. Open the
door less often.
The door is not sealed properly.
Door is slightly open, causing cold air from inside the wine cooler to
meet warm moist air from outside.
The wine cooler is not on a level surface. The gasket is dirty.