Gas burners
LR
RR
C
LF
RF
Position
Purpose
Right Front (RF)
Power heating
17,000 BTU
Right Rear (RR)
Low simmering
5,000 BTU
Center (C)
General heating/
10,000 BTU
Griddling
Left Front (LF)
Quick heating
16,000 BTU
Left Rear (LR)
General heating/
9,500 BTU
Low simmering
NX60T8311SS_AA_DG68-01222A-00_EN+MES+CFR.indb 17
Each burner has a corresponding knob
that lets you to set the flame level from LO
to HI. In addition, each burner knob has a
Lite setting. Turning a knob to Lite ignites
the corresponding burner. The burner
indicators are located above each knob
and show which burner the knob controls.
Each burner is designed for specific cooking
purposes. See the table below.
Food type
Characteristics
Boiling food
Maximum output
Chocolate,
Delicate food that
casseroles, sauces
requires low heat
for a long time
General food/
General-purpose
Pancakes, fried
cooking
eggs
General
General-purpose
cooking
General food,
General-purpose
casseroles
cooking
Ignition
CAUTION
Make sure all surface burners are properly
installed. To light a burner:
1. Push in the control knob, and then turn
2
1
2. After the surface burner lights, turn
3. Turn the control knob to adjust the flame
Manual ignition
If there is a power failure, you can ignite the burner manually. Use caution when
doing this.
1. Hold a long gas grill lighter to the surface burner you want to light.
2. Push in the control knob for that burner, and then turn it to the Lite position.
Turn on the grill lighter to ignite the burner.
3. After the burner is lit, turn the control knob to adjust the flame level.
it to the Lite position. You will hear a
"clicking" sound indicating the electronic
ignition system is working properly.
the control knob to shift it out of the
Lite position and turn off the electronic
ignition system.
level.
English 17
2020-03-27
11:34:03