Attaching Other Displays (S3Display) - Clevo M660SE Manual Del Usuario

Concise User's Guide

Attaching Other Displays (S3Display)

External displays may also be configured from S3Display tab in Advanced Display Settings:
1. Attach the external display to the external monitor port and turn it on.
2. Click Advanced Settings in the Display Settings control panel (see "Video Features" on page 23) to display the
additional tabs.
3. Select S3Display (tab).
4. Click to put a tick in the tickbox under the CRT icon.
5. Click Apply > OK and allow the monitor time to refresh the display.
6. Click Yes to confirm the settings.
7. Select the CRT icon, and then click Refresh rate to change the settings for the attached display.
Figure 13 - New Display Detected (S3Display)
26 - Video Features