Steren ELI-030 Manual De Instrucciones

Before using your new Regulated voltage converter, read carefully this user's manual.
Do not select a voltage higher that the one required by the electronic device on your converter.
It is recommended that you select a voltage lower than the voltage set on your equipment.
Do not use or store this equipment in places where there are leaks or water spattering.
This can cause a malfunction or an electric shock.
Do not try to open the equipment, this can cause a malfunction and void the warranty.
If the power cord is damaged, go with an authorized distributor for its replacement.
Disconnect the voltage converter before cleaning it. Always use a soft dry cloth to clean
your equipment.
Your voltage converter allows you to feed directly the electric network to tape recorders,
televisions, video games, CD players, camcorders, etc.
this regulated voltage converter makes it very safe for your electronic equipment as it
avoids it from being damaged.
1. Select with the voltage switch, the electricity network
to 110-120V.
2. Insert the multiple connector to the connection cable. It is very important to verify the
polarity of your electronic appliance and that you select the same in your power adaptor.
If your equipment requires positive polarity match TIP sign of the connection cable with the
symbol (+) of the multiple connector so that the center es positive. If you match the TIP sign
with the (-) symbol, the center will be negative.
3. Using the voltage selector, choose the amount of voltage
required according to your electronic equipment (3 / 4,5
/ 6 / 7,5 / 9 / 12V - - -). For additional security choose a
lower voltage than the one that has been marked on the
equipment you wish to connect.
4. Connect the power adaptor to the outlet.
5. Insert the connector that is appropiate for your electronic equipment.
Troubleshooting
When the power adaptor does not let energy flow:
1. Check that the converter cable isn´t damaged.
2. Check that the plug is correctly connected to the outlet.
3. Make sure that the voltage selector is the correct position according to your electronic
device.
4. Check that the connector is suitable for your equipment.
5. Check that your outlet has energy.
Specifications
Input: 110/240V ~ 60/50Hz 5W
Output: 3/ 4,5/ 6/ 7,5/ 9/ 12V - - -
Nominal consumption: 5.05kWh/month
Stand-by power consumption: 8.76kWh/year
Important
Highlights
Operation
Product: Regulated voltage converter
Model: ELI-030
Brand: Steren
This Steren product is warranted under normal usage against defects in workmanship
and materials to the original purchaser for one year from the date of purchase.
1.- This warranty card with all the required information, invoice or purchase ticket, product
box or package, and product, must be presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was
received.
4.- Steren sell parts, components, consumables and accessories to customer, as well
as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries,
failure to follow enclosed instructions, improper repair by unauthorized personnel, improper
safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase
ticket.
RETAILER INFORMATION
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
Product design and specifications are subject to change, without notice.
WARRANTY
CONDITIONS
In case your product fails
or have questions, please
contact your nearest dealer.
If you are in Mexico, please
give a call to our Call Center.
Call Center
01 800 500 9000