Silvercrest SLE 200 B2 Instrucciones De Uso página 19

Emptying the water tank
The water tank 4 has a capacity of approx. 2.1 litres. The water level can
be checked by means of the fill level indicator 5. The appliance can only be
operated with the water tank 4 inserted. When the water tank 4 is full, the
WATER TANK FULL LED o lights up. In addition, the appliance will also beep
for approx. 20 seconds. The dehumidification stops; the fan continues to run for
approx. 3 minutes and then switches itself off.
♦ Carefully pull the water tank 4 out of the appliance using the recessed
grips on the side (see figure 2).
Fig. 2
♦ Empty the water tank 4 into a sink (see figure 3) and replace the water
tank 4 in the appliance. The appliance resumes operation with the previ-
ously selected programme.
Fig. 3
■ 16 │ GB │ IE SLE 200 B2