Publicidad
STEP 15
Carefully position the unit onto it's front side as shown. Flush the bottom edge of the back panel (S)
with the bottom edge of the bottom (E). Start the screw (5) along both sides of the back panel (S) as
shown but do not tighten. Keeping the bottom edge flush with the bottom, nail (9) straight into the
back edges of the top (D) and bottom (E) as shown. Now tighten the screws (5).
5
ameriwoodhome.com
5
(x8)
#A12120
5
5
5
S
E
9
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART
OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
(x22)
#A21110
Assure that the unit is square. Distance from
corner to corner must be equal as shown.
9
22
9
5
5
5
5
D
Publicidad
