Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS: To reduce the risks of fire or explosion, electrical shock and the injury to
persons, read and understand all instructions included in this manual. Be familiar with the controls and the
proper usage of the equipment.
●This product is intended for household use only.
Warning! Fire or explosion hazard. Solvent and spray material fumes can explode or ignite.
Severe injury or property damage can occur.
To avoid these risks, take the following preventions:
●Exhaust and fresh air introduction must be provided to keep the air within the spray area free from
accumulation of flammable vapors
●Avoid all ignition sources such as static electricity sparks, open flames, pilot lights, hot objects, lit tobacco
products, and sparks from connecting and disconnecting power cords or working light switches.
●Fire extinguisher equipment shall be present and working.
●Keep area clean and free of paint or solvent containers, rags, and other flammable mate- rials.
●Follow the material and solvent manufacturer's safety precautions and warnings
●Do not spray flammable or combustible materials near an open flame or sources of ignition such as lit
tobacco products, motors, and electrical equipment.
●Know the contents of the spray materials and their cleaning solvents Read all Material Safety Data Sheets
(MSDS) and container labels provided with the spray materials and solvents. Follow the spray material and
solvent manufacturer's safety instructions
●Do not use materials with a flashpoint higher than 60°C (140°F). Flashpoint is the temperature that a fluid
can produce enough vapors to ignite (see coating supplier).
Warning! Explosion hazard due to incompatible materials. Severe injury or property damage can
occur.
To avoid these risks, take the following preventions:
●Do not use bleach.
●Do not use hydrogenated solvents such as methylene chloride and 1,1,1 - trichloroethane. They are not
compatible with aluminum and may cause an explosion. If you are unsure of a material's compatibility with
aluminum, contact your coating supplier.
Warning! Hazardous vapors. Spray materials, solvents, and other materials can be harmful if
inhaled or come in contact with the body. Vapors can cause severe nausea, fainting, or poisoning.
www.ELITETOOLS.co
Keep Working
9
Publicidad
