Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Gas hose passage way
1. Connect the appliance to the gas piping tap in shortest possible route
and in a way that ensure no gas leakage will occur.
2. In order to carry on a tightness and sealing safety check ensure that
the knobs on the control panel are closed and the gas cylindir is open.
WARNING: While performing a gas leakage check, never use any kind of
lighter, match, cigarette or similar burning substance.
3. Apply soap bubble on the connection points. If there is any kind of
leakage then it will cause bubbling.
4. While inserting the appliance in place ensure that it is on the same
level with the worktop. If required adjust the legs inorder the make level
with the worktop.
5. Use the appliance on a level surface and in a well ventilated environment.
WARNING: Before placing the appliance, check that the local
distribution conditions (gas type and pressure) conform to the product
settings.
Figure 1
18
Figure 1.1
Publicidad
