Publicidad
Idiomas disponibles
Idiomas disponibles
N.B.: Use the kettle only while the lid 2 is
closed and the limescale filter 8 is in place.
For physical reasons, the base 9 may
collect some condensation water. This is
normal; it does not mean that the kettle 1
leaks. When you set the temperature to
100°C, the kettle will turn off only after the
water has reached the boiling point, i.e. it
will bubble for a short period of time.
After boiling, let the kettle cool down for 5
minutes before refilling it with water.
Do not turn on the appliance if the kettle 1
is empty, otherwise the overheat control will
engage and the appliance will switch itself
off automatically.
Keep warm setting
You can turn on the keep warm with any
temperature setting.
Press button 7. U lights up, and the function
is activated. To turn it off, press button 7
again. The U indicator goes off.
Note: The keep warm feature switches off
automatically after 30 minutes. The kettle
emits a signal.
Cleaning and
maintenance
¡ Risk of electric shock!
Never immerse the device in water or place
it in the dishwasher!
Do not steam-clean the appliance.
● Before cleaning, unplug the appliance
from the power outlet.
● Clean the outside of the kettle 1 and base
9 with a damp cloth. Do not use strong or
abrasive cleaning agents.
● Remove the limescale filter 8, soak it in a
little vinegar, then rinse clean with clear
water.
● Rinse the kettle 1 and the limescale filter
8 with clear water.
Tip: Clean the stainless steel surface with a
commercial stainless steel care product.
Descaling
Regular descaling
● makes your kettle last longer;
● ensures proper function;
● saves energy.
Descale the kettle 1 with vinegar or a com-
mercial descaling agent.
● Fill the kettle 1 with water up to the 1.5
mark and bring to a boil. Next, add a
small amount of white vinegar and let it
sit for several hours. You can also use a
commercial descaling product and follow
the manufacturer's instructions.
● Rinse the kettle 1 and the limescale filter
8 with clear water.
Warning: Never use hard objects to remove
limescale residue as this will damage the
seal.
Tip: If you use the kettle daily, descale
more frequently.
Troubleshooting
The kettle does not heat up; the tempera-
ture indicator 5 does not light up.
The overheat control has tripped.
Æ
Æ
● Let the kettle 1 cool down for some time
so that the appliance can be switched on
again.
The unit turns off before the water comes to
a boil.
The kettle contains too much scale.
Æ
Æ
● Descale the kettle as per the instructions.
en
9
Publicidad
