CLEANING AND MAINTENANCE
WARNING: Always unplug the device from the electrical outlet before
opening the powder tank.
NOTE: Whenever you use the vacuum cleaner, the filter must be in place.
CAUTION: The suction opening must be open and free of obstructions. If
not, the motor will overheat and could be damaged.
Cleaning outer surface
1.
Remove the plug from the outlet.
2.
Clean the outer surface of all parts with a damp cloth and a cleaner
suitable for plastics
3. Over time, dust and dirt can accumulate around the wheel axles,
preventing the wheels from turning easily. Therefore, you should
keep them clean.
Never immerse the appliance, plug or power cord in water and
never use corrosive or abrasive cleaning products or sharp objects
(such as knives or hard brushes) to clean the appliance.
Limpieza del tanque de polvo
1.
Remove the plug from the socket and remove the flexible tube (8).
2.
Remove the powder tank by pressing the tank removal button (12)
and position it on top of a rubbish bin.
3. Press the button to open the bottom cover.
4. If necessary, use your hand to remove debris from the tank.
5. Close the bottom flap of the tank, and press until it clicks.
6. Put it back on the vacuum and snap it into position.
|
24