Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty carton to
å
avoid scratching your unit or the fl oor.
Push twenty-eight HIDDEN CAMS (1F) into the BOTTOM (B),
å
VALANCES (E and F), and SKIRTS (G and H). Then, insert the
metal end of a CAM DOWEL (2F) into each HIDDEN CAM in the
long edges of the VALANCES (E and F).
(6 used)
G
www.sauder.com/services
Arrow
2F
(28 used)
H
H
F
G
Hole
Do not tighten the HIDDEN CAMS in this step.
1F
Long edges
E
F
Arrow
The arrow in the HIDDEN CAM
must point toward the hole in
the edge of the board.
415269
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
B
E
Arrow
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Page 5
Publicidad
