Publicidad
Craftsman Zero-Turn Rider Model 247.25002
777S33184
AVOID SERIOUS INJURY OR DEATH
• KEEP HANDS AND FEET AWAY FROM ROTATING PARTS.
• REMOVE OBJECTS THAT CAN BE THROWN BY THE BLADE IN ANY
DIRECTION. WEAR SAFETY GLASSES.
• DO NOT MOW WHEN CHILDREN OR OTHERS ARE AROUND.
NEVER CARRY CHILDREN EVEN WITH BLADES OFF.
• USE EXTRA CAUTION ON SLOPES. DO NOT MOW SLOPES GREATER
THAN 15˚. MOW ACROSS NOT UP AND DOWN. AVOID SUDDEN TURNS, USE LOW SPEED.
READ OPERATOR'S MANUAL. KEEP SAFETY DEVICES IN PLACE AND WORKING.
777S30503
DANGER
KEEP HANDS AND FEET AWAY.
DO NOT OPERATE MOWER
UNLESS CHUTE DEFLECTOR
OR ENTIRE GRASS CATCHER IS
IN ITS PROPER PLACE.
ASSEMBLE CHUTE DEFLECTOR TO THIS UNIT BEFORE OPERATING.
777I22489
Release Both Transmission Release
Levers Before Moving Vehicle
To Drive (Transmission
Engage), Lift Rod Into
Large Opening And
Release.
To Push (Transmission
Disengage), Lift Rod
Through Large Opening,
Push Down.
777D16806
777D16807
777S34190
I22489 AC
PARTS LIST
777S33084
STARTING INSTRUCTIONS
FOR FIRST-TIME OPERATORS
• To START, PARK BRAKE must be set
• Start Off In A Flat, Open Area.
• Keep Bystanders Away.
• P.T.O. switch in OFF (down) position
• Lap bars in NEUTRAL and outward positions
• Set Throttle At A Low Speed.
• Practice Maneuvering, (Forward,
• Throttle set properly, CHOKE position if "cold"
• Turn key to ON, then START, release when engine runs
Reverse, Left, Right) Without Deck Engaged.
NOTICE
METER MINDER
• PTO Automatically Disengages When Both Lap
Every 50 Hours of Use a "Change Oil"
Message Will Flash On The Display For 2
Bars AreMoved Into Reverse.
• PTO Automatically Reengages When Levers Are
Minutes Every Time The Tractor Is
Started. Follow The Oil Change Intervals
Returned To The Neutral Or Forward Positions.
Provided In The Engine Manual.
PTO
HANDLE
OPERATION
S33820
777I22973
777I23134
FAST
SLOW
S30503
777D15546
D15546
62
777I22282
777D16808
Key
777I22885
HOURS 1/10
777D16810
50"
cutting deck
777X44930 (On units produced
on or before Dec. 31, 2011)
EMISSION CONTROL INFORMATION
MTD CONSUMER GROUP INC.
This equipment meets U.S. EPA EVP
regulations for 2011 model year.
EVP Family: BMTDPNHEQNC1
X44930
777X45529 (On units produced
on or after Jan. 1, 2011)
EMISSION CONTROL INFORMATION
MTD CONSUMER GROUP INC.
This equipment meets U.S. EPA EVP
regulations for 2012 model year.
EVP Family: CMTDPNHEQNC1
X45529
Publicidad
