Publicidad
Idiomas disponibles
Idiomas disponibles
STORAGE
When vacuuming is complete, your. RIDGID Wet/Dry
Vac has convenient locations to store the Power Cord,
Expandable Hose (F), and Accessories.
NOTE: Unplug Power Cord from power source for
storage.
CORD STORAGE (Fig. 8)
1. Push down on the Left Side Storage Lid Latch,
located at the top left of the Powerhead Assembly.
Open the Side Storage Lid to expose the Cord
Storage Compartment and Blower Port. Please see
the "BLOWING FEATURE" under Operation Section
for blowing directions.
2. Coil the Power Cord around your hand until you
get within a foot of the Storage Bin. Use the Velcro
Strap to secure the coil. The coiled Power Cord
should now be store neatly into the Side Storage
Compartment.
3. Rotate Left Side Storage Lid up and snap the latch
into place, storing the Power Cord.
TOP COVER ACCESSORY STORAGE (Fig. 9)
1. Push in on the Top Cover Lid to release the
latch. Rotate the Top Cover Lid up to expose the
Accessory Storage Compartment.
2. Place the Crevice Tool (D) and the Dusting Brush
(E) onto the specific locations molded into the
compartment housing, as shown. Only these
two specific accessories should be stored in this
location.
3. Rotate the Top Cover Lid down and snap the latch
into place, storing the Accessories.
NOTE: Regularly check and empty any liquids from the
accessory and cord storage compartments.
HOSE STORAGE (Fig. 10)
1. Insert the Expandable Hose (F) with the Locking
Tab End into the Vac Inlet Port, located on the side
of the Dust Drum (B), above the RIDGID SWEEP
Label. Feed the Expandable Hose (F) up and around
the Hose Storage Lip and down the back side to
place the other End of the Hose into the SWEEP
Inlet Port.
WARNING:
Do not put any object into ventilation openings.
Do not vacuum with any ventilation openings
blocked; keep free of dust, lint, hair or anything
that may reduce air flow.
SP7125 HD03000 2022.indb 9
SP7125 HD03000 2022.indb 9
(A)
Power Cord
Velcro Strap
Polarized Plug
Storage Lid
Latch
Top Cover Lid
Top Cover
Lid Latch
Hose Storage Lip
Vac Inlet
Port
Hose
Locking
Tab
(F)
SWEEP Label
9
Fig. 8
Left Side
Storage Lid
Fig. 9
Accessory Storage
Compartment
(E)
(D)
Fig. 10
SWEEP
Inlet Port
6/2/22 10:21 AM
6/2/22 10:21 AM
Publicidad
