Martec FOURSEASONS PRIMO FSP1244 Serie Manual De Instrucciones página 4

HOW TO ASSEMBLE
Secure the hanger bracket to ceiling beam or a suitable piece of timber inserted between the ceiling beams.
Martec Pty Ltd recommends the bracket to be attached with two long screws as supplied within the package.
There is a ball seat rubber cover need to be pressed into the bracket.(See Fig.1.)
Place circular shockproof gasket above the hanger bracket. Align the bracket and screw the hanger bracket to
the ceiling tightly.(See Fig.2.)
Place fan into hanger bracket and align Ball Joint Slot with hanger bracket as illustrated.(See Fig.3.)
After wiring is completed, attach the canopy to the hanger bracket by pushing upwards and twisting anti­
clockwise. Locate screws in keyholes and tighten., ensuring canopy is not touching the ball joint. (See Fig.4)
Fig.1
ball seat rubber cover
(Packed with hanger bracket)
Anti-vibration washer
Fig.3
Page 3
Fig.2
Fig.4