visually inspect to see that
the blades, blade bolts and
cutter assembly are not
worn or damaged. Replace
worn or damaged blades
and bolts in sets to preserve
balance. Replace damaged
and unreadable labels.
Operation
a) mow only in daylight or in
good artificial light;
b)avoid operating the
equipment in wet grass,
where feasible;
c) always be sure of your
footing on slopes;
d)walk, never run;
e) for wheeled rotary
machines, mow across the
10
face of slopes, never up
and down;mow across the
face of slopes, never up and
down.
f) exercise extreme caution
when changing direction on
slopes;
g)do not mow excessively
steep slopes;
h)use extreme caution when
reversing or pulling the
lawnmower towards you;
i) stop the blade(s) if the
lawnmower has to be tilted
for transportation when
crossing surfaces other
than grass, and when
transporting the lawnmower
Cordless Lawn mower
to and from the area to be
mowed;
j) never operate the
lawnmower with defective
guards , or without safety
devices, for example
deflectors and/or grass
catchers, in place;
k) switch on the motor
carefully according to
instructions and with feet
well away from the blade(s);
l) do not tilt the lawnmower
when switching on the
motor, except if the
lawnmower has to be tilted
for starting. In this case,
do not tilt it more than
absolutely necessary and lift
only the part which is away
from the operator;
m)do not put hands or feet
near or under rotating parts.
Keep clear of the discharge
opening at all times;
n)not to touch the blades
before the disabling device
has been removed and
the blades have come to a
complete stop;
o) Do not start the lawnmower
when standing in front of
the discharge opening.
p)Do not transport the
lawnmower while the power
source is running.
q)Stop the lawnmower,and
remove the disabling
EN