Descargar Imprimir esta página

EBL LN-6420 Manual De Instrucciones página 2

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 8
LED
Positive "+"
AA Negative "-"
AAA Negative "-"
General Information
Detailed instruction is provided in this manual (The charger's function,
safety usage ways and notices.)
Product Overview
Upgraded charger, comes with USB Port, much convenient for travel
usage.
Individual 4 Bay charger which could charge 1/2/3/4 AA AAA Ni-MH
Ni-CD rechargeable batteries.
This charger adopts MCU control technology, providing constant current
& voltage while working.
USB Port
1
Specification
Input: 5V 1A
Output: AA/AAA 1.2V 4*250mA(Max)
No Load Power Consumption: 0.5W Max
Full Load Power Consumption: 5W Max
Battery Charging Rate ≧ 80%
Environment Condition
Using Temperature: 0~35℃ ; Humidity ≤95%
Storage Temperature: -20℃ ~ 50℃ ; Humidity ≤60%
Working Temperature:
Surface temperature of charger ≤60℃
Surface temperature of battery ≤50℃
Using Instruction
Place the battery into the charger correctly by making sure the +/- pole
of the battery is corresponding to the +/- pole of the charger.
The charger can freely charge 1/2/3/4 AA AAA Ni-MH Ni-CD rechargeable
batteries, support to charge battery by even and uneven.
Smart indicator show the charging progress:
Power on - GREEN; Charging - RED; Fully charged - GREEN
Cautions
If the indicator does not light on when installed the battery into the charg-
er, please check if the battery is placed correctly and if the battery is
absolute 0 Volt. (0 Volt means bad battery)
New battery will reach peak performance after 3-5 times charge &
discharge cycle.
Battery will lost part of capacity after not being used more than one month,
please fully charged the battery before using.
2

Publicidad

loading