Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly & Set-Up
Contents of Carton
•
Chipper Shredder (1)
•
Bottle of Oil (1)
Assembly
NOTE:
This unit is shipped without gasoline or oil in
the engine. Fill up gasoline and oil as instructed in
the accompanying engine manual BEFORE operating
your chipper shredder.
Chipper Chute (Model Series 4325 Only)
For shipping reasons, the unit is crated with its
chipper chute in a raised position. To pivot it
downward, proceed as follows:
1.
Pull the spring latch upward.
2.
Gently pivot the chipper chute down until it
clicks into the lock rod. See Figure 3-1.
WARNING:
Never operate the
chipper shredder with the chipper
chute in the raised position. Doing so
may result in property damage or
serious injury to the operator or
bystanders.
B
Figure 3-1
All manuals and user guides at all-guides.com
•
Operator's Manual (1)
•
Bag (1)
Bag
To attach the bag:
1.
Place the opening of the bag completely over
the chute deflector. See Figure 3-2.
A
2.
Position the bag so that the wing knobs which
secure the chute deflector to the impeller
housing are completely covered.
3.
Pull on the draw-strap until the bag is tight
around chute deflector opening.
Figure 3-2
•
Engine Operator's Manual (1)
•
Safety Glasses (1)
Set-Up
Gas and Oil Fill-Up
Refer to the separate engine owner's manual for
additional engine information.
1.
Add oil provided before starting unit for the
first time out of the box. Refer to the separate
engine owner's manual for information
regarding adding and checking the oil.
2.
Service the engine with gasoline as instructed
in the separate engine owner's manual.
WARNING:
Use extreme care when
handling gasoline. Gasoline is
extremely flammable and the vapors
are explosive. Never fuel the machine
indoors or while the engine is hot or
running. Extinguish cigarettes, cigars,
pipes and other sources of ignition.
WARNING:
Never fill fuel tank
indoors with engine running. Before
fueling, turn engine off. Wait until the
engine has been allowed to cool for at
least two minutes after running before
fueling.
3
5
Publicidad
