Publicidad
Idiomas disponibles
Idiomas disponibles
Español
English
6. TYPE OF PRODUCTS AND COMPONENTS DW90
H
A
G
A
B
C
D
E
F
G
H
7. SAFETY INFORMATION
General safety instructions
• Carefully read the instructions before you start using the device. Violation of rules of use of the device may
lead to electric shock, fire and serious injury.
• Keep these instructions for future use.
• The compressor is designed to inflate car, motorcycle and bicycle tires, inflatable sports equipment. Do not
use the compressor for other purposes.
• This compressor is designed to pump air into the air tanks, cylinders and shock absorbers.
• Keep away from children! Do not leave the device unattended when children are nearby.
• Do not leave the compressor unattended.
• Do not use the compressor continuously for more than the time set by the manufacturer (see Section 2
Specifications). Longer work can lead to overheating of the compressor and its failure. Allow the compressor
to cool for at least 20 minutes before using it again.
• Do not exceed the maximum inflation pressure or other product, which is usually indicated on the tire of
the car or sporting equipment.
• Do not use the compressor in fire zones in the vicinity of flammable substances.
• Do not use the compressor in damp or wet conditions.
• Use the compressor only in conjunction with the accompanying accessories to it.
ATTENTION!
This compressor is designed to work only on DC 12 V. Do not use any other power sources not modify the
compressor.
B
E
Fuse 30A
The handle for carrying the compressor
Manometer
Air hose
Connecting connector
A set of nozzles
Terminals for connection to the battery
terminals
On / off button
D
C
10
F
Publicidad
