Publicidad
Idiomas disponibles
Idiomas disponibles
English
• If your car's battery is not sufficiently charged, the system voltage may not be sufficient for the effective ope-
ration of the compressor. In this case, it is recommended to use the compressor when the engine of the car.
• Do not turn on the car engine in a poorly ventilated room, it can lead to poisoning by exhaust fumes!
• Do not carry the compressor power cord or air hose.
• Do not allow dirt, ashes or other objects into the cigarette lighter socket. Foreign objects can cause a viola-
tion of a reliable electrical contact, cause overheating of the cigarette lighter socket and cause damage to the
vehicle, injury and fire.
• When using a compressor immediately unplug it from the electrical system.
8. USING YOUR MACHINE
1. Remove the compressor from its packaging and / or bags.
2. Screw the detachable hose to the compressor.
3. Plug the power cord into the cigarette lighter socket in the 12 car models DW60L, DW70L. For compressor
DW90 connect terminals and the battery terminals.
4. Attach the air hose connector to the spool of the tire.
Inflating balls and other equipment used by the application nozzle.
Do not use nozzles and other accessories not included with this compressor.
5. Switch off the compressor button "on / off". Continue pumping until the desired pressure.
ATTENTION!
Do not exceed the recommended manufacturer tire pressure or other article! Watch the pressure gauge
during operation of the compressor.
6. Depending on the model used by the compressor, remove the power plug from the cigarette lighter socket
of the car, or remove the clips from the battery terminals.
7. Allow the compressor to cool.
8. Carefully place the compressor and accessories in storage bag.
9. MAINTENANCE
Recommendations for maintenance
• After each use, remove any dirt from the compressor. To clean the housing use a damp cloth. Do not use
solvents or sharp objects.
• Before long-term storage, to prevent corrosion, coat all metal parts lubricated.
• Periodically check the integrity and reliability of cable, hose, no damage to them.
ATTENTION!
For safe use of compressors equipped with a fuse (Fig. 1).
• To replace the fuse in the compressors and DW60L DW70L: if it is blown, remove the fuse by unscrewing
the plug end of the cord, and insert a new one. Use standard fuses 15 A.
• To replace the fuse in the compressor DW90: if it is blown, remove the fuse opening FUSE cap on the com-
pressor housing, and insert a new fuse. Use fuses of 30 A.
(Fig. 1)
11
Publicidad
