Intended Use; Supplied Parts; Unpacking The Appliance - BOMANN HDM 462 EK CB Instrucciones De Servicio

Máquina de perritos calientes
Ocultar thumbs Ver también para HDM 462 EK CB:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19

Intended Use

The appliance is designed for
• the preparation of hot sausages;
• boiling eggs;
• warming bread rolls.
It is intended for domestic use and similar applications such as
• in staff kitchens in shops, offices and other workplaces;
• in farm properties.
It is not intended for the following use:
• by guests in hotels, motels and other accommodation;
• in bed & breakfast facilities.
The appliance is only to be used as described in the user man-
ual. Do not use the appliance for any commercial purposes.
Any other use is not intended and can result in damages or
personal injuries.
The manufacturer assumes no liability for damages caused by
improper use.

Supplied parts

1
Hot dog maker appliance
1
Steamer
1
Lid
1
Egg holder (in 3 parts)
1
Measuring cup with egg pricker

Unpacking the appliance

1. Remove the appliance from its packaging.
2. Remove all packaging materials such as films, filler mate-
rial, cable clips and carton.
3. Check the contents for completeness.
NOTE:
Production residue or dust may have collected on the appli-
ance. We recommend cleaning the appliance according to
chapter "Cleaning".
Controls
1 Lid handle
2 Steamer handles
3 Steamer
4 Egg holder
5 Locking pins
6 Water tray
7 Function selector
8 Indicator lamp heater
9 Housing
10 Vertical spike
11 Steam outlet
Not shown:
Measuring cup with egg pricker
Instructions
Location
Stand the appliance on a level, damp and heat resistant sur-
face. Stand the appliance up in such a way that it cannot topple
over.
Electrical connection
Check whether the mains voltage which you want to use
matches that of the appliance. The details can be found on the
information plate of the appliance.
Function of the selector
0
Appliance is off
1
Water tray with steamer is warming up
2
Vertical spike warming up
3
Water tray with steamer and vertical spike is being
warmed up
Function of the indicator lamp
The indicator lamp indicates the heating process.
Settings 1 and 3:
If the water tray is empty, the appliance is switched off via the
thermostat. The indicator lamp goes out. If you do not switch
the appliance off, a keep-warm phase begins. The temperature
of the steamer is controlled and retained. This is shown by the
indicator lamp. The temperature of the vertical spike drops to
around 40°C.
Measuring cup
The measuring cup is an accessory to be used when you use
the appliance as an egg boiler.
Decide how soft or hard you want your boiled eggs to be. Se-
lect the volume of water with the measuring cup. The markings
on the cup mean the following:
soft / weich
for soft-boiled eggs
medium / mittel
for half-boiled eggs
hard / hart
for hard-boiled eggs.
Using the appliance as a hot dog maker
1. Ensure that the mains plug is not plugged in that the func-
tion selector is on "0".
2. Fill the water tray with water up to the MAX mark (Maximum
fill level: 60 ml).
3. Place the steamer (without the egg holder) onto the water
tray. In doing so, check the locking pins: These must
snap into the notches on the steamer. Press the steamer
securely onto the locking pins.
4. Put a maximum of 14 sausages with a diameter of 2.5 cm
into the steamer. The sausages must not be longer than
13.5 cm, so that the lid seals the steamer properly. Do not
overfill the steamer since otherwise the appliance cannot
function properly and the sausages will not become hot.
5. Place the lid onto the steamer.
35

Publicidad

Tabla de contenido
loading

Tabla de contenido