Amano Pioneer Eclipse FM 1700HD Manual De Instrucciones página 5

Figure 1
Figure 2
Apply pressure to lock
Figure 3
Figure 4
Amano Pioneer Eclipse Operator's Manual FM 1700HD
All manuals and user guides at all-guides.com
The Start/Stop Levers. See figure 1.
The Start/Stop levers are under the handle grips.
The Interlock Switch. See figure 2.
The interlock switch is on the handle assembly under the Start/Stop
levers.
The Locking Lever. See figure 3.
The locking lever is on the bottom of the handle assembly at the back
of the machine.
To connect a brush or pad driver, follow this procedure:
1. Put the handle in the vertical position.
2. To fasten the handle, press down on the locking lever.
3. Put the handle on the floor.
4. Put one foot on each side of the machine. See figure 4.
5. Fit the lugs on the bottom of the machine into the openings in
6. Turn the brush or accessory clockwise to lock it into position.
7. Turn the brush or accessory counterclockwise to unlock and
8. Lift the machine to the vertical position.
NOTE: To prevent damage to the brush or pad driver, remove
the accessory while not in use.
To connect a solution tank, follow the instructions given with the tank.
THE CONTROLS
HOW TO PREPARE THE MACHINE
FOR OPERATION
WARNING: Always remove the electrical plug from the
electrical outlet before installing or removing
a brush or accessory.
the brush.
remove the brush or accessory.
EN
ENGLISH
5