JVC DT-V1710CG Instrucciones página 38

CONTROLS AND FEATURES
FRONT VIEW
<Front Panel>
1
UNDER PULSE COLOR
MUTING DEGAUSS SCAN CROSS OFF SLOT 1 SLOT 2 SLOT 3 POWER
A
B C D E F
VOLUME MENU SCREENS ASPECT AREA INPUT SELECT
CHECK MARKER
(Front view of DT-V1910CG
shown)
1 Tally lamp
Lights when the tally control signal is ON.
• Set the MAKE/TRIGGER terminal's tally control in the
REMOTE (external control) terminal setup menu.
The lamp colour can be set to red or green.
• To set the colour, use TALLY SELECT in the
"FUNCTION SETTING" setup menu or MAKE/
TRIGGER in the REMOTE (external control) terminal
setup menu.
For details, refer to Page 19 and 23.
2
PHASE adjustment knob
Adjusts picture hue.
• Turn the knob to the left to make the picture redder, and
turn it to the right to make the picture greener.
3 CHROMA adjustment knob
Adjusts picture colour density.
• Turn the knob to the left to make the picture colour
lighter, and turn it to the right to make the picture colour
deeper.
BRIGHT adjustment knob
4
Adjusts picture brightness.
• Turn the knob to the left to make the picture darker, and
turn it to the right to make the picture brighter.
CONTRAST adjustment knob
5
Adjusts picture contrast.
• Turn the knob to the left to make the picture contrast
lower, and turn it to the right to make the picture
contrast higher.
VOLUME buttons
6
Adjusts the speaker volume.
• Pressing this button displays the VOLUME level bar on
the screen. Pressing the button again allows you to
adjust speaker volume.
4
2 3 4 5 7
6
8 11 12 13 14
UNDER PULSE COLOR
MUTING DEGAUSS SCAN CROSS OFF
MENU SCREENS ASPECT AREA
VOLUME
CHECK MARKER
9 6 10 15 16 17
7 MUTING button
Pressing this button mutes the output sound.
• To cancel "MUTING ON" (no sound), press MUTING
button again, or press the VOLUME "–" or "+" buttons.
NOTE:
When a menu or setting item (such as MAIN MENU, SETUP
MENU, sub-menu, or VOLUME bar) is displayed on the screen,
this button functions as a control button for the menu screen. In
this case, it will not mute the sound when pressed.
8 EMBEDDED AUDIO channel switch button
Press this button while the VOLUME bar is
displayed on the screen to change the input
sound channel.
• When the button is pressed, the next highest
channel is selected.
• When the button is pressed, the next lowest channel
is selected.
NOTES:
Switchable channels correspond with the group selected in the
"E.AUDIO GROUP" of the "FUNCTION SETTING" setup menu.
* Valid when an input card compliant with EMBEDDED AUDIO is
installed.
9 Menu select buttons
Selects menu screen items or set-up menu
screen.
10 MENU button
Displays, adjusts or closes a menu screen.
11 DEGAUSS button/lamp
Press the DEGAUSS button. The button lights
and degaussing is performed automatically.
• When the degaussing is completed, the light goes off.
19 20
18
SLOT 1 SLOT 2 SLOT 3
A
B C D E F
INPUT SELECT
POWER